https://www.snscientificsolution.com Latest Products Sun, 17 May 2026 00:36:08 +0530 en-us https://www.snscientificsolution.com https://www.snscientificsolution.com/cement-testing-equipment.htm https://www.snscientificsolution.com/cement-testing-equipment.htm Thu, 09 Sep 2021 00:00:00 +0530 https://www.snscientificsolution.com/cement-sampler.htm https://www.snscientificsolution.com/cement-sampler.htm Tue, 14 Apr 2026 00:00:00 +0530 Specifications: This Is A Tube Approximately 53cms Long And 2.8cms I.D. With A Wooden Handle. Total Length Approximately 73cms. The Tube Has The Sharp Angular Edge Which Convinently Pierces Cement Bags. An Air Hole Of Approximately 3mm Dia Is Drilled On The Tube Near Handle.  https://www.snscientificsolution.com/blaine-air-permeability-apparatus.htm https://www.snscientificsolution.com/blaine-air-permeability-apparatus.htm Sat, 11 Sep 2021 00:00:00 +0530 https://www.snscientificsolution.com/vicat-needle-apparatus.htm https://www.snscientificsolution.com/vicat-needle-apparatus.htm Sat, 11 Sep 2021 00:00:00 +0530 https://www.snscientificsolution.com/gillmore-needle-apparatus.htm https://www.snscientificsolution.com/gillmore-needle-apparatus.htm Sat, 11 Sep 2021 00:00:00 +0530 https://www.snscientificsolution.com/concrete-testing-equipment.htm https://www.snscientificsolution.com/concrete-testing-equipment.htm Thu, 09 Sep 2021 00:00:00 +0530 https://www.snscientificsolution.com/vee-bee-consistometer.htm https://www.snscientificsolution.com/vee-bee-consistometer.htm Tue, 14 Apr 2026 00:00:00 +0530 https://www.snscientificsolution.com/slump-test-apparatus.htm https://www.snscientificsolution.com/slump-test-apparatus.htm Tue, 14 Apr 2026 00:00:00 +0530 The slump cone having dimension as (ID-100mm at top ID- 200mm at bottom & length 300mm) is filled with freshly mixed concrete and is tamped with a tamping bar in four layers. The top of the concrete is levelled off with the top of the slump cone, the cone is lifted vertically up and the slump of the sample is immediately measured.Slump Test Apparatus is with testing rod & base plate. https://www.snscientificsolution.com/kelley-ball-penetration-apparatus.htm https://www.snscientificsolution.com/kelley-ball-penetration-apparatus.htm Sat, 11 Sep 2021 00:00:00 +0530 https://www.snscientificsolution.com/compaction-factor-apparatus.htm https://www.snscientificsolution.com/compaction-factor-apparatus.htm Tue, 14 Apr 2026 00:00:00 +0530 Compaction Factor Apparatus As per IS1199:1999 Compaction factor test apparatus consists of,  1) Two conical hoppers and a bottom cylinder which is arranged as shown in below fig. 2) Steel rod of 1.6 cm Diameter with a length of 61cm is used to tamp the concrete 3) Weight balance is used to weight the concrete. Compaction Factor Test   Compaction Factor Test Procedure The sample of concrete to be tested shall be placed gently in the upper hopper, using the hand scoop.  The hopper shall be filled level with its brim and the trap-door shall be opened so that the concrete falls into the lower hopper. Certain mixes have a tendency to stick in one or both of the hoppers. If this occurs, the concrete may be helped by pushing the rod gently into the concrete from the top. Immediately after the concrete has come to rest, the cylinder shall be uncovered, the trap-door of the lower hopper opened, and the concrete allowed falling into the cylinder.  The excess of concrete remaining above the level of the top of the cylinder shall then be cut off by holding a trowel. Weight the cylinder with concrete to the nearest 10 g. This weight is known as the weight of partially compacted concrete (W1). Empty the cylinder and then refill it with the same concrete mix in layers approximately 5 cm deep, each layer being heavily rammed to obtain full compaction. Level the top surface. Weigh the cylinder with fully compacted. This weight is known as the weight of fully compacted concrete (W2). Find the weight of the empty cylinder (W). https://www.snscientificsolution.com/soil-testing-equipment.htm https://www.snscientificsolution.com/soil-testing-equipment.htm Fri, 10 Sep 2021 00:00:00 +0530 https://www.snscientificsolution.com/soil-cone-penetrometer.htm https://www.snscientificsolution.com/soil-cone-penetrometer.htm Sat, 11 Sep 2021 00:00:00 +0530 https://www.snscientificsolution.com/semi-automatic-cone-penetrometer.htm https://www.snscientificsolution.com/semi-automatic-cone-penetrometer.htm Sat, 11 Sep 2021 00:00:00 +0530 https://www.snscientificsolution.com/manual-liquid-limit-device.htm https://www.snscientificsolution.com/manual-liquid-limit-device.htm Sat, 11 Sep 2021 00:00:00 +0530 https://www.snscientificsolution.com/motorized-liquid-limit-device.htm https://www.snscientificsolution.com/motorized-liquid-limit-device.htm Sat, 11 Sep 2021 00:00:00 +0530 https://www.snscientificsolution.com/bitumen-testing-equipment.htm https://www.snscientificsolution.com/bitumen-testing-equipment.htm Fri, 10 Sep 2021 00:00:00 +0530 https://www.snscientificsolution.com/ring-ball-apparatus.htm https://www.snscientificsolution.com/ring-ball-apparatus.htm Sat, 11 Sep 2021 00:00:00 +0530 https://www.snscientificsolution.com/standard-penetrometer.htm https://www.snscientificsolution.com/standard-penetrometer.htm Tue, 14 Apr 2026 00:00:00 +0530 https://www.snscientificsolution.com/reflux-extractor.htm https://www.snscientificsolution.com/reflux-extractor.htm Sat, 11 Sep 2021 00:00:00 +0530 https://www.snscientificsolution.com/aggregate-testing-equipment.htm https://www.snscientificsolution.com/aggregate-testing-equipment.htm Fri, 10 Sep 2021 00:00:00 +0530 https://www.snscientificsolution.com/cylindrical-measuring-bucket.htm https://www.snscientificsolution.com/cylindrical-measuring-bucket.htm Tue, 14 Apr 2026 00:00:00 +0530 Determines bulk density or unit weight of aggregates. specificaton: Calibrated cylinder measure of sheet iron with handel Consists of 3 measures one each 3 litres capacity, 15 litre capacity,30 litre capacity complete with one Tamping Rod Round 16mm dia and 600 mm long one end rounded made from  sheet iron  complete with handel capacity 10 litre or 20 litre. https://www.snscientificsolution.com/density-basket.htm https://www.snscientificsolution.com/density-basket.htm Sat, 11 Sep 2021 00:00:00 +0530 https://www.snscientificsolution.com/aggregate-crushing-value-apparatus.htm https://www.snscientificsolution.com/aggregate-crushing-value-apparatus.htm Tue, 14 Apr 2026 00:00:00 +0530 The apparatus for the standard aggregate crushing test as per IS: 2386-1963 (Part IV) consist of the following: The test mold-a 15.2 cm diameter open-ended steel cylinder with square base plate; plunger having a piston of diameter 15 cm, a rod could be inserted for lifting or placing the plunger in the cylinder with a provided hole across the stem of the plunger. A straight metal tamping rod of circular cross-section 16mm in diameter and 45 to 60 cm long, rounded at one end. A balance of capacity 5 kg, readable and accurate up to 1 gm. IS sieve of sizes 12.5mm, 10mm, 2.36mm. A compression testing machine capable of applying load up to 40 tonnes at a uniform rate of 4 tonnes per minute. A cylinder measure having an internal diameter of 11.5 cm and height of 18 cm. https://www.snscientificsolution.com/aggregate-impact-tester.htm https://www.snscientificsolution.com/aggregate-impact-tester.htm Tue, 14 Apr 2026 00:00:00 +0530 The apparatus of the aggregate impact value test consists of: A testing machine weighing 45 to 60 kg and having a metal base with a plane lower surface of not less than 30 cm in diameter.  Level and plane concrete floor of minimum 45 cm thickness are used to support it. The base of the machine should also have provisions for fixing its base. A cylindrical steel cup of internal diameter 102 mm, depth 50 mm and minimum thickness 6.3 mm. A metal hammer or tup weighting 13.5 to 14.0 kg the lower end is cylindrical in shape, is 50 mm long, 100.0 mm in diameter, with a 2 mm chamfer at the lower edge and case hardened. The hammer is arranged in such a way that it should slide freely between vertical guides and be concentric with the cup. It is arranged that the  free fall of the hammer should be within 380±5 mm. A cylindrical metal measure having an internal diameter of 75 mm and depth 50 mm for measuring aggregates. One end rounded tamping rod 10 mm in diameter and 230 mm long. A balance of capacity not less than 500 g, and readable and accurate up to 0.1 g. https://www.snscientificsolution.com/rock-testing-equipment.htm https://www.snscientificsolution.com/rock-testing-equipment.htm Fri, 10 Sep 2021 00:00:00 +0530 https://www.snscientificsolution.com/rock-core-drilling-machine.htm https://www.snscientificsolution.com/rock-core-drilling-machine.htm Tue, 14 Apr 2026 00:00:00 +0530 The objective of the test method is to measure the working and ultimate capacities of rock bolt anchors. The system comprises of a central hole jack,hand pump with a load gauge, directional control value (only for central hole jacks above the capacity of 500 kn), flexible hose pipe 5 mts, truss high tensile bolts with coupling. In general the pull out force is indicated on the load gauge, however a load cell with digital indicator can be used to measure the pull out load. Arrangement is provided for fixing the dial gauge for estimating deflection against the load. These are used to measure the working and ultimate capacities of rock bolt anchors. Further, our products comprises of a central hole jack, hand pump with load gauge, directional control valve and only for central hole jacks above the capacity of 500kN, flexible pipes, truss high tensile test rod with coupling.         https://www.snscientificsolution.com/rock-compression-test-load-frame.htm https://www.snscientificsolution.com/rock-compression-test-load-frame.htm Fri, 10 Sep 2021 00:00:00 +0530 https://www.snscientificsolution.com/rock-hoek-triaxial-cell.htm https://www.snscientificsolution.com/rock-hoek-triaxial-cell.htm Fri, 10 Sep 2021 00:00:00 +0530 https://www.snscientificsolution.com/steel-testing-machine.htm https://www.snscientificsolution.com/steel-testing-machine.htm Fri, 10 Sep 2021 00:00:00 +0530 https://www.snscientificsolution.com/laboratory-equipment.htm https://www.snscientificsolution.com/laboratory-equipment.htm Fri, 10 Sep 2021 00:00:00 +0530 https://www.snscientificsolution.com/steel-brinell-hardness-testing-machine.htm https://www.snscientificsolution.com/steel-brinell-hardness-testing-machine.htm Fri, 10 Sep 2021 00:00:00 +0530 https://www.snscientificsolution.com/steel-impact-testing-machine.htm https://www.snscientificsolution.com/steel-impact-testing-machine.htm Fri, 10 Sep 2021 00:00:00 +0530 https://www.snscientificsolution.com/enamel-tray.htm https://www.snscientificsolution.com/enamel-tray.htm Sun, 24 Oct 2021 00:00:00 +0530 https://www.snscientificsolution.com/sampling-bowl.htm https://www.snscientificsolution.com/sampling-bowl.htm Tue, 14 Apr 2026 00:00:00 +0530 https://www.snscientificsolution.com/laboratory-scoop.htm https://www.snscientificsolution.com/laboratory-scoop.htm Tue, 14 Apr 2026 00:00:00 +0530 Stainless Steel Laboratory Scoops is made with one pointy end and one blunt end. This type of functional design allows for digging out and handling of small quantities of substances. Stainless Steel Laboratory Scoops is used for accurately dispensing powders and granules hygienically in the laboratory. It is suitable for any hygienic application.Stainless Steel Laboratory Scoops is made of superior grade stainless steel which is resistant to corrosion, chemical abrasion and also easy to use and handle as all its parts are welded by Argon welding. Its well-designed look gives elegant and aesthetic finish.Steel Laboratory Scoops is 100% quality checked and tested since it is manufactured by the latest well-equipped CNC machinery and latest techniques like cutting and bending and for any other structural flaws by our highly qualified professional staff according to Indian and international industry standards guidelines.At S.N Scientific Solution, by using cutting edge industrial manufacturing methods and quality controls through production sections we confirm that customers get prime Stainless Steel Laboratory Scoops custom-made to client's requirements. Each pharmaceutical product is developed as per the ISO standards and pharmaceutically is safe and hygienic. https://www.snscientificsolution.com/cement-mortar-flow-table.htm https://www.snscientificsolution.com/cement-mortar-flow-table.htm Sat, 11 Sep 2021 00:00:00 +0530 https://www.snscientificsolution.com/length-comparator.htm https://www.snscientificsolution.com/length-comparator.htm Sun, 24 Oct 2021 00:00:00 +0530 https://www.snscientificsolution.com/volume-change-apparatus.htm https://www.snscientificsolution.com/volume-change-apparatus.htm Sun, 24 Oct 2021 00:00:00 +0530 IS 1199-1959, IS 4031 1968 BS 1881, ASTM C 151, C490It Is Used To Measure The Dying Shrinkage Of Concrete Autoclave Expansion Of Portland Cement And Potential Expansive Reactivity Of Cement Aggregate Combinations In Mortar Bars During Storage, On Self Drying.The Instrument Consists Of A Channeled Base Over Which Two Vertical Pillars Are Fixed. An Adjustable Cross Plate Is At The Top. A Dial Gauge, Reading To https://www.snscientificsolution.com/mortar-mixer.htm https://www.snscientificsolution.com/mortar-mixer.htm Sun, 24 Oct 2021 00:00:00 +0530 Mortar Mixer has been specifically designed to mix cement paste and mortars to standard requirements. The machine can be operated in either automatic or manual mode. The mixer uses an elliptical mixing motion for thorough and efficient mixing and includes microprocessor control of the speed and mixing program. Specifications Speed (rpm)PaddleMixing Head Low 140 ± 5 62 ± 5 High 285 ± 10 125 ± 10 Rated power 180 W Bowl capacity 5 liters Weight 54 kg Dimension (LxWxH) 530 x 350 x 580 mm https://www.snscientificsolution.com/vibrating-machine.htm https://www.snscientificsolution.com/vibrating-machine.htm Tue, 14 Apr 2026 00:00:00 +0530 Product Description in this machine the mould is mounted on the vibrating platform with having frequency of 12,000 ± 400 vibrations per minute. The entire assembly is operated by the revolving shaft with eccentric mechanism and the platform is attached with four matched springs. https://www.snscientificsolution.com/marsh-funnel.htm https://www.snscientificsolution.com/marsh-funnel.htm Tue, 14 Apr 2026 00:00:00 +0530 Description S.N Scientific Solution Marsh Funnel is a rugged, easy to operate instrument for rapid, on the spot measurements of drilling mud viscosity. The rate of gelation and the density of the slurry considerably influence the viscosity measurement. Frequent reporting of the funnel viscosity makes it possible for mud engineers to observe sudden changes in the slurry viscosity and to take corrective action when necessary. Funnel viscosity is the ratio of the speed of the slurry as it passes through the outlet tube (shear rate) to the force (weight of the slurry) causing the slurry to flow (shear stress). Funnel viscosity is reported as the seconds required for one quart of slurry to flow out a full funnel. Equipment • Marsh Funnel • Measuring Cup (graduated) • Stopwatch • Thermometer https://www.snscientificsolution.com/mud-balance.htm https://www.snscientificsolution.com/mud-balance.htm Sat, 11 Sep 2021 00:00:00 +0530 https://www.snscientificsolution.com/concrete-flow-table.htm https://www.snscientificsolution.com/concrete-flow-table.htm Tue, 14 Apr 2026 00:00:00 +0530 Flow table test of concrete: As the name suggests, in this test the workability of concrete is determined by examining the flowing property of concrete. Flow table test of concrete also determines the Quality of Concrete concerning its consistency, cohesiveness and the proneness to segregation.As there are two methods to find the flow value of concrete which one is outdated. Here we are explaining the new method of flow table test. This new flow table test is covered with BS 1881 part 105 of 1984 and DIN 1048 part I. Apparatus of Flow Table Test: Flow table made of metal having thickness 1.5mm and dimensions 750mmx 750mm, tamping rod made of hardwood, Scoop, Centimeter Scale, Metal Cone or mould (Lower Dia = 20cm, upper Dia = 13 cm, Height of Cone = 20cm). The middle portion of flow table is marked with a concentric circle of dia 200mm to place a metal cone on it. A lift handleThe more details about Flow table is depicted in the below image go through it if required. https://www.snscientificsolution.com/v-funnel-apparatus.htm https://www.snscientificsolution.com/v-funnel-apparatus.htm Tue, 14 Apr 2026 00:00:00 +0530 The V Funnel Apparatus is used to evaluate the flow time of freshly mixed self-compacting concrete. The test set consists of a stainless steel funnel placed vertically on a supporting stand. The discharge orifice is equipped with a lid, which can be momentarily opened. https://www.snscientificsolution.com/l-shape-box-apparatus.htm https://www.snscientificsolution.com/l-shape-box-apparatus.htm Tue, 14 Apr 2026 00:00:00 +0530 Specification: The L Shape box is used for determining the passing ability rate of freshly mixed self compacting concrete. The distance between 12 mm diameter bars can be set between 41±1 mm or 59±1 mm. L Shape box is designed for ease of cleaning the vertical and horizontal hoppers. https://www.snscientificsolution.com/u-shape-box-apparatus.htm https://www.snscientificsolution.com/u-shape-box-apparatus.htm Tue, 14 Apr 2026 00:00:00 +0530 https://www.snscientificsolution.com/pocket-concrete-penetrometer.htm https://www.snscientificsolution.com/pocket-concrete-penetrometer.htm Tue, 14 Apr 2026 00:00:00 +0530 S.N Scientific Solution Soil Pocket Penetrometer also called a hand penetrometer is constructed of stainless steel. It is a simple, lightweight, handheld device made for instant estimates of the unconfined compressive strength of cohesive soils. Although it does not replace laboratory Unconfined Compressive Strength Test Systems for the determination of unconfined shear strengths, the Pocket Penetrometer is a valuable tool for providing approximate values quickly. It is specified for soil strength estimates when evaluating the stability and safety of trench excavations. Such evaluations can determine the need to modify slope angles or to reinforce excavations with shoring. The penetrometer can be purchased in the Soil Classification Set which includes various tools and instruments for field evaluation and classification of soil characteristics. The 0.25in (6.4mm) diameter penetration piston is pushed into the soil surface to a groove machined on the piston at 0.25in (6.4mm) depth. Penetration resistance from the calibrated spring is registered on an integrated scale engraved on the penetrometer barrel. Scale units are shown in tons per square foot (tsf) or kg/cm², and a sliding indicator ring retains the reading until reset. Stainless steel heavy-duty construction of the pocket penetrometer ensures a long, corrosion-free service life. The calibrated steel spring is plated for rust resistance. An optional adapter foot attachment increases the piston diameter from 0.25in (6.4mm) to 1in (25mm), increasing the surface area 16 times for testing very soft soils. https://www.snscientificsolution.com/curing-tank.htm https://www.snscientificsolution.com/curing-tank.htm Tue, 14 Apr 2026 00:00:00 +0530 https://www.snscientificsolution.com/high-speed-stirrer.htm https://www.snscientificsolution.com/high-speed-stirrer.htm Tue, 14 Apr 2026 00:00:00 +0530 High Speed Mixer consist of a motor of reputed make. All contact parts will comprise of S.S 304 material. It will have a protecting cage with two 20 mm bar  held apart by closing flat ring clamping on to the bar. The shaft will be coupled directly to the motor shaft. An extra bearing on the coupling sleeve will be  provided to reduce the load on the motor bearing. lt will consist of an impeller of special design.   High speed disperseris widely used in the chemical production to blend and mix liquid with solid or liquid with liquid. It is suitable for all the premixing, ready mixing, dissolving. Applicable for Paint, Ink, Pigment, Color paste, paper making, resin, food, beverage...etc https://www.snscientificsolution.com/plummet-balance.htm https://www.snscientificsolution.com/plummet-balance.htm Sat, 11 Sep 2021 00:00:00 +0530 https://www.snscientificsolution.com/speedy-moisture-meter.htm https://www.snscientificsolution.com/speedy-moisture-meter.htm Sat, 11 Sep 2021 00:00:00 +0530 https://www.snscientificsolution.com/soil-permeability-apparatus.htm https://www.snscientificsolution.com/soil-permeability-apparatus.htm Sat, 11 Sep 2021 00:00:00 +0530 https://www.snscientificsolution.com/sand-pouring-cylinder.htm https://www.snscientificsolution.com/sand-pouring-cylinder.htm Tue, 14 Apr 2026 00:00:00 +0530 SizeDiameter of cylinderCapacity of Cylinder Small 115 3 Liters Medium 165 9 Liters Large 215 16.5 Liters https://www.snscientificsolution.com/sand-density-cone-apparatus.htm https://www.snscientificsolution.com/sand-density-cone-apparatus.htm Tue, 14 Apr 2026 00:00:00 +0530 The sand cone density test is an accepted and inexpensive method of determining the in-place density of soils. Effective in soils with particle sizes up to 2in (51mm), using test hole volumes of approximately 0.1ft³ (2.8L). https://www.snscientificsolution.com/soil-core-cutter.htm https://www.snscientificsolution.com/soil-core-cutter.htm Tue, 14 Apr 2026 00:00:00 +0530 Product Description With an objective to fulfill the needs of the patrons, we are engaged in manufacturing, supplying and wholesaling Cube Cutter and Hammer. These products are manufactured under the supervision of experienced professionals, who strictly follow industry laid guidelines. Our professionals utilize optimum quality material to manufacture these products offered by us. Along with this, our experts keeps vigil on every stage of production to maintain higher standards of quality. In order to offer qualitative products, our professionals stringently examine these products on different parameters to ensure their flawlessness and then forward for the final dispatch to the patrons. To fulfill the diversified requirements of the clients, all these products are available in various specifications as well as in customized range. Core cutter apparatus is used for determination of dry density of soil. Mild steel cylindrical cutter is used to extract the cylindrical sample of soil with the help of dolly and hammer.   Specifications:   Relevant Standard IS : 2720 p – xxix Cylindrical Steel Cutter : 100 mm Pipe ID / wall thickness 3mm / 130 mm long / beveled at one end M.S.Rammer : Solid mild steel bar Diameter 140 mm & 75 mm height screwed centrally 25 mm bright MS bar. Total height approximately 900 mm of both MS bar Steel Dolly : 100 mm I.D. Pipe , 25 mm height , wall thickness 7 mm beveled to fit on steel cutter https://www.snscientificsolution.com/soil-pycnometer.htm https://www.snscientificsolution.com/soil-pycnometer.htm Sat, 23 Oct 2021 00:00:00 +0530 The Pycnometer is used for determination of specific gravity of soil particles of both fine grained and coarse grained soils. The determinination of specific gravity of soil will help in the calculation of void ratio, degree of saturation and other different soil properties. https://www.snscientificsolution.com/universal-extruder-frame.htm https://www.snscientificsolution.com/universal-extruder-frame.htm Sat, 23 Oct 2021 00:00:00 +0530 California Bearing Ratio (CBR) Mold Set. California Bearing Ratio (CBR) Mold Set is for use in CBR testing. The set consists of a 6x7in (152x178mm) Mold Body, 2in (51mm) Compaction Collar, and a perforated Mold Base with threaded rods and wing nuts. Constructed of heavy, rust-resistant plated steel. https://www.snscientificsolution.com/digital-penetrometer.htm https://www.snscientificsolution.com/digital-penetrometer.htm Sat, 11 Sep 2021 00:00:00 +0530 https://www.snscientificsolution.com/manual-centrifuge-extractor.htm https://www.snscientificsolution.com/manual-centrifuge-extractor.htm Fri, 22 Oct 2021 00:00:00 +0530 Max. quantity of asphalt per extraction: 3.5 kg. Max. ... Time required for a complete extraction: from 25 to 45 min. Max. ... Rotating speed: 12000 r.p.m. Current specifications: 220-380 V, 50-60 Hz, 3 ph., 3.5 kW. Overall dimensions of the testing unit: 1200x650x1200 mm approx. Weight approx.: 170 kg. https://www.snscientificsolution.com/motorised-centrifuge-extractor.htm https://www.snscientificsolution.com/motorised-centrifuge-extractor.htm Sun, 24 Oct 2021 00:00:00 +0530 ASTM D6926, D5581; AASTHO T245 (only for UTAS-0071); BS-598   The UTAS-0670 and UTAS-0676 Marshall Manual Assemblies are used to prepare Marshall specimens manually. The Compaction Assemblies consist of a Marshall Compaction Hammer and a Wooden Compaction Pedestal. The Pedestals are supplied complete with a steel plate, a mould holder and a hammer guide. UTAS-0667 and UTAS-0668 Marshall Steel Blocks are used for initial heating of the foot of compaction hammer should be ordered separately.     https://www.snscientificsolution.com/bitumen-viscometer.htm https://www.snscientificsolution.com/bitumen-viscometer.htm Sat, 11 Sep 2021 00:00:00 +0530 https://www.snscientificsolution.com/marshall-stability-test-apparatus.htm https://www.snscientificsolution.com/marshall-stability-test-apparatus.htm Mon, 20 Sep 2021 00:00:00 +0530 https://www.snscientificsolution.com/ductility-testing-apparatus.htm https://www.snscientificsolution.com/ductility-testing-apparatus.htm Sat, 11 Sep 2021 00:00:00 +0530 https://www.snscientificsolution.com/benkelman-beam.htm https://www.snscientificsolution.com/benkelman-beam.htm Sat, 11 Sep 2021 00:00:00 +0530 https://www.snscientificsolution.com/skid-resistance-and-friction-tester.htm https://www.snscientificsolution.com/skid-resistance-and-friction-tester.htm Mon, 25 Oct 2021 00:00:00 +0530  any of various tools or devices with a helical shaft or part that are used for boring holes (as in wood, soil, or ice) or moving loose material (such as snow) https://www.snscientificsolution.com/tile-abrasion-testing-machine.htm https://www.snscientificsolution.com/tile-abrasion-testing-machine.htm Sat, 11 Sep 2021 00:00:00 +0530 https://www.snscientificsolution.com/digital-abrasion-testing-machine.htm https://www.snscientificsolution.com/digital-abrasion-testing-machine.htm Sat, 11 Sep 2021 00:00:00 +0530 https://www.snscientificsolution.com/gauging-trowel.htm https://www.snscientificsolution.com/gauging-trowel.htm Sat, 11 Sep 2021 00:00:00 +0530 https://www.snscientificsolution.com/flow-cone.htm https://www.snscientificsolution.com/flow-cone.htm Mon, 20 Sep 2021 00:00:00 +0530 https://www.snscientificsolution.com/sand-content-kit.htm https://www.snscientificsolution.com/sand-content-kit.htm Tue, 14 Apr 2026 00:00:00 +0530 https://www.snscientificsolution.com/capping-set.htm https://www.snscientificsolution.com/capping-set.htm Sat, 11 Sep 2021 00:00:00 +0530 https://www.snscientificsolution.com/serological-water-bath.htm https://www.snscientificsolution.com/serological-water-bath.htm Mon, 25 Oct 2021 00:00:00 +0530 With years of successful experience our company is manufacturing Gyratory Sieve Shaker Machines, offering worry free performance for long hours of continuous working. With using advanced manufacturing technology and high quality materials and parts, our Gyratory Motion Sieve Shakers have been acclaimed by many industry experts worldwide. Due to excellent working performance, these units are much in demand today and available on the market at great price with instant delivery. Combining world-class and unmatched quality with an economical price, our Indian make Gyratory Sieve Shaker machine can fulfill your laboratory needs while still offering a great value for the money.   https://www.snscientificsolution.com/laboratory-oven.htm https://www.snscientificsolution.com/laboratory-oven.htm Sat, 11 Sep 2021 00:00:00 +0530 https://www.snscientificsolution.com/round-hot-plate.htm https://www.snscientificsolution.com/round-hot-plate.htm Sat, 11 Sep 2021 00:00:00 +0530 https://www.snscientificsolution.com/double-door-dryer.htm https://www.snscientificsolution.com/double-door-dryer.htm Mon, 25 Oct 2021 00:00:00 +0530 Specification: Used for the compaction of concrete samples in a mould. Generally the vibratory hammer is found to be a much faster & quicker method as compared to impact hammering. The vibratory hammers are supplied with 1 tamping feet & 1 shank.Used for determination of the relative quantity of mixing water that will bleed from a sample of freshly mixed concrete.Dimensions : 290 x 255 x 350 mmWeight (approx.) : 40 kg https://www.snscientificsolution.com/heating-mantle.htm https://www.snscientificsolution.com/heating-mantle.htm Sat, 11 Sep 2021 00:00:00 +0530 https://www.snscientificsolution.com/high-temperature-furnace.htm https://www.snscientificsolution.com/high-temperature-furnace.htm Mon, 25 Oct 2021 00:00:00 +0530    CBR Test Apparatus. Consisting of Loading machine with capacity of atleast 5000 kg and equipped with a movable head or base which enables Plunger of 50 mm dia. to penetrate into the specimen at a rate of 1.25 mm/ minute. https://www.snscientificsolution.com/bosshead-clamp.htm https://www.snscientificsolution.com/bosshead-clamp.htm Sat, 23 Oct 2021 00:00:00 +0530 Integral Proving Ring   The Proving Rings are made up of special steel, carefully forged to give maximum strength and machined to give high sensitivity commensurate with stability, ensuring long life and accuracy. All proving rings are integral type viz. the loading (outside) bosses are forged integral with the ring body. This ensures that there is no possibility of abutment shift and consequent loss of accuracy in reading that always exists with bolted abutments. Repeatability in these Proving Rings is as stipulated in IS:4169.The rings are supplied complete with dial gauge and Works Calibration Chart, individually packed in polished wooden boxes. National Physical Laboratory (NPL), (India)/ National Council for Cement & Building Material (NCCBM )Calibration can also be arranged for any proving ring at an additional cost. Proving rings to meet special requirements are also available on request.Separate polished and ground pair of Loading Pads for Compression Proving Rings and pair of Shackles for Tension Proving Rings are provided to suit each proving ring.   Models available:   https://www.snscientificsolution.com/disc-type-wire-gauge.htm https://www.snscientificsolution.com/disc-type-wire-gauge.htm Tue, 14 Apr 2026 00:00:00 +0530 Specific gravity is the basis of methods used throughout history to concentrate ores. Panning, jigging, shaking, spiral separation, and heavy-medium separation are among the methods that depend on differences in specific gravity to obtain concentrated ore.  https://www.snscientificsolution.com/digital-dial-gauge.htm https://www.snscientificsolution.com/digital-dial-gauge.htm Sun, 24 Oct 2021 00:00:00 +0530 Manual Flow Table for determining consistency (flow) and preparing mortars of standard consistency for testing. The Manual Flow Table provides reliable results and is recommended for applications where strict adherence to standards is not essential. Flow Table has 10in (254mm) diameter rigid cast bronze table supported in cast iron frame. Base and special drive motor bracket mount to the concrete pedestal. Concrete pedestal not included. Included cast bronze flow mold has 2.75/4in (70/102mm) top/bottom ID with a collar. Features: Cast bronze table supported in cast iron frame Mounts to the concrete pedestal https://www.snscientificsolution.com/snap-dial-gauge.htm https://www.snscientificsolution.com/snap-dial-gauge.htm Sat, 23 Oct 2021 00:00:00 +0530 The Sand Absorption Cone And Tamper is used in determining the specific gravity and water absorption of fine aggregates smaller than 10 mm. The apparatus is manufactured from plated steel for protection against corrosion.  Sand Absorption (Abraham Cone) Set consist of following equipments;• Absorption Abraham Cone• Tamping Rod Specifications Abraham Cone Upper Dia 40 mm Abraham Cone Lower Dia 75 mm Tamping Rod Base Dia 25 mm Tamping Rod Height 180 mm Dimensions 90x90x180 mm Weight 0,6 kg https://www.snscientificsolution.com/vernier-caliper.htm https://www.snscientificsolution.com/vernier-caliper.htm Fri, 22 Oct 2021 00:00:00 +0530 Procter Mould 100mm 150mm With Rammer Powdeer Coated & Zink. https://www.snscientificsolution.com/cbr-accessories.htm https://www.snscientificsolution.com/cbr-accessories.htm Mon, 20 Sep 2021 00:00:00 +0530 https://www.snscientificsolution.com/hydraulic-extractor.htm https://www.snscientificsolution.com/hydraulic-extractor.htm Tue, 14 Apr 2026 00:00:00 +0530 100mm dia,And 150mm dia cylinder core,Plunger for 150mm dia moulds And Thrust Plate for 100mm. dia. Moulds.